Training Wall Padding

$1,950.00 $2,160.00

Landing Area


Select your desired footprint to use under a home or commercial training wall. If you need a different or a larger landing area, we offer custom padding options starting at a minimum of 100 square feet of 8" padding. Extended lead times may apply.

Your shipping charges for this product will be calculated and communicated to you after you place your order via email.

*Ships approximately 3-4 weeks from order date*

Perfect small area padding solution! Great for climbing walls, training areas, aerial arts, and more. 

Our 1680 Denier Ballistic Cover eliminates the exposed seam covers and provides continuous coverage from edge to edge. The tarp can be removed for repairs and the system can still properly function with in-tact seam covers. Tarp repairs are typically needed after 3 years in a commercial setting. New seam covers, tarps, and Closed Cell Foam can be ordered at any time to refresh your system.

We will email a payment link for your freight quote with 24 business hours of your order.


FREIGHT RANGES- These are not final estimates. This is a loose average for freight to a residential area with no lift gate or inside delivery.

Four Pads Total                       Five or Six Pads Total

NW & SW STATES- $400        NW & SW STATES- $550
SE STATES-  $550                    SE STATES-  $650
NE STATES-  $600                   NE STATES-  $700

- each pad is 48 x 48 x 8 inches thick for the 8' x 8' area (4 total)
- two 48 x 48 x 8 inch and two 72 x 48 x 8 inch thick pads for the 8' x 10' area (4 total)
- each pad is 72 x 48 x 8 inches thick for the 8' x 12' (4 total), 10' x 12' (5 total) and 12' x 12' areas (6 total)

- dual density high-quality open and closed cell foams
- 1" cross-linked closed cell can be ordered to refresh pads to a like new condition

- rugged 1000 denier nylon shells
- two drag handles
- velcro around top perimeter and included seam covers allows pads to connect to each other
- easy foam removal for service and maintenance
- red warning edges
- triple stitching in stress points

-set comes with seam covers to attach the drag pads together
-set comes with an extra set of seam covers for replacement

1680 denier ballistic nylon cover
- water-resistant for easy spot cleaning with a damp cloth
- hook velcro around the perimeter attaches to the edge of the system
- provides a continuous landing surface by covering exposed seam covers

- triple stitching with hidden seams
- easy removal for service and maintenance


We always recommend creating as big of a landing zone as possible. Current best practices are to have padding at 8 feet from the plumb everywhere in the landing zone. Some aspects of climbing and related activities, including but not limited to indoor climbing and bouldering are potentially hazardous and dangerous. Any person using our equipment in any manner is personally responsible for learning the proper techniques involved, and assumes all risks and accepts full and complete responsibility for any and all damages or injury of any kind, including death, which may result from the use of any equipment purchased through this website.